View UPG2158T5K_4187904.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY PRODUCT INFORMATION GaAs INTEGRATED CIRCUIT
UPG2158T5K
L,S-BAND SPDT SWITCH
DESCRIPTION
The UPG2158T5K is a GaAs MMIC for L,S-band SPDT Single Pole Double Throw which were designed for mobile phone and the another L,S-band applications. This device can operate frequency from 0.05GHz to 3.0GHz,, having the low insertion loss and high isolation. This device is housed in a 6-pin TSON Thin Small Out-line Non-Leaded package. And this package is able to high-density surface mounting.
FEATURES
Switch Control Voltage Low Insertion Loss : Vcont H = 1.8 to 5.3V 2.7V TYP. : Vcont L = -0.2 to 0.2V 0V TYP. : Lins1 = 0.40dB TYP.@ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins2 = 0.40dB TYP.@ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins3 = 0.45dB TYP.@ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins4 = 0.47dB TYP.@ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins5 = 0.53dB TYP.@ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL1 = 27dB TYP. @ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL2 = 27dB TYP. @ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL3 = 19dB TYP. @ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL4 = 17dB TYP. @ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL5 = 17dB TYP. @ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 1dB = +30.5.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 0.1dB = +29.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : 6-pin TSON package 1.0 1.0 0.4 mm
High Isolation
Handling Power High-density surface mounting
APPLICATION
L,S-band digital cellular or cordless telephone W-LAN, WLL and BluetoothTM etc.
ORDERING INFORMATION
Part Number UPG2158T5K-E2-A Package 6-pin TSON 1010 Marking G2 Supplying Form TBD
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order : UPG2158T5K
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Document No. PG*****EJW2V0PM ( 2nd edition ) Date Published April 2005 CP(K)
UPG2158T5K
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. 1 1 6 5 4 1 2 3 6 5 4 6 5 4 1 2 3 2 3 4 5 6 Pin Name OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
Top View
Top View
Bottom View
G2
Vcont2 High Low Parameter Vcont1 - Vcont2 Parameter
2 3
SW TRUTH TABLE
Vcont1 Low High INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF
ASOLUTE MAXIMUM RATINGS Unless otherwise specified, TA = +25
Symbol Vcont Pin TA Tstg 6.0V Ratings +6.0Note +31 -45 to +85 -55 to +150 Unit V dBm
Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature Note
RECOMMENDED OPERATING RANGE
Symbol Vcont Vcont
H L
Unless otherwise specified, TA = +25
MIN. 1.8 -0.2 TYP. 2.7 0 MAX. 5.3 0.2 Unit V V
Switch Control Voltage H Switch Control Voltage L
2
Preliminary Product Information
UPG2158T5K
ELECTRICAL CHARACTERISTICS TA = +25 , Vcont(H) = 2.7V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified
Parameter Insertion Loss1 Insertion Loss2 Insertion Loss3 Insertion Loss4 Insertion Loss5 Isolation1 Isolation2 Isolation3 Isolation4 Isolation5 Input Return Loss1 Input Return Loss2 Output Return Loss1 Output Return Loss2 0.1dB Loss Compression Input PowerNote2 1dB Loss Compression Input PowerNote3 2nd Harmonics 3rd Harmonics Input Intercept Point Switch Control Current Switch Control Speed Symbol Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 RLin1 RLin2 RLout1 RLout2 Pin
0.1dB
Test Conditions f = 0.05 to 0.5GHzNote1 f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1
MIN. 23 23 16 14 14 15 15 15 15 +26.0 65 65 -
TYP. 0.40 0.40 0.45 0.47 0.53 27 27 19 17 17 20 20 20 20 +29.0 +29.0 +30.5 75 75 +60 0.2 50
MAX. 0.45 0.45 0.50 0.55 0.60 20 500
Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBc dBc dBm uA ns
f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz f = 0.5 TO 3.0GHz
Pin
1dB
f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz, Pin=+20dBm f = 2.0GHz/2.5GHz, Pin=+20dBm f = 0.5 to 3.0GHz, 2tone 5MHz spacing
2f0 3f0 IIP3 Icont tSW
50
CTL to 90/10
-
Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range. Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range.
Preliminary Product Information
3
UPG2158T5K
ELECTRICAL CHARACTERISTICS TA = +25 , Vcont(H) = 1.8V, Vcont(L) = 0V,DC cut capacitors = 56pF,Unless otherwise specified
Parameter Insertion Loss6 Insertion Loss7 Insertion Loss8 Insertion Loss9 Insertion Loss10 Isolation6 Isolation7 Isolation8 Isolation9 Isolation10 Input Return Loss1 Input Return Loss2 Output Return Loss1 Output Return Loss2 0.1dB Loss Compression Input PowerNote2 1dB Loss Compression Input PowerNote3 Switch Control Current Switch Control Speed Symbol Lins6 Lins7 Lins8 Lins9 Lins10 ISL6 ISL7 ISL8 ISL9 ISL10 RLin1 RLin2 RLout1 RLout2 Pin
0.1dB
Test Conditions f = 0.05 to 0.5GHzNote1 f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1
MIN. 23 23 16 14 14 15 15 15 15 +19.0 -
TYP. 0.40 0.40 0.46 0.48 0.54 27 27 19 17 17 20 20 20 20 +22.0 +22.0 +25.0 0.2 50
MAX. 0.46 0.47 0.52 0.57 0.62 20 500
Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm uA ns
f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz f = 0.5 TO 3.0GHz
Pin
1dB
f = 0.5 to 3.0GHz
Icont tSW 50 CTL to 90/10
-
Note1. DC cut capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is measured the input power level when the insertion loss increases more 0.1dB than that of linear range. Note3. Pin 1dB is measured the input power level when the insertion loss increases more 1dB than that of linear range.
4
Preliminary Product Information
UPG2158T5K
EVALUATION CIRCUIT
Vcont1 INPUT Vcont2
C0 1000pF 6 5 4 1000pF
C0 : f = 0.05 to 0.5GHz 1000pF f = 0.5 to 3.0GHz 56pF
1 C0
2
3 C0
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Preliminary Product Information
5
UPG2158T5K
PACKAGE DIMENSIONS 6-PIN TSON UNIT: mm
0.15
+0.07 -0.05
0.45 0.1 0.35 0.06 0.35 0.06 1.0 0.1
6
Preliminary Product Information
0.13 0.07 0.23 0.07
1.0 0.1
0.15
0.175 0.075
+0.07 -0.05
0.37 -0.05
+0.03
UPG2158T5K
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature package surface temperature Time at peak temperature Time at temperature of 220 or higher Preheating time at 120 to 180 Maximum number of reflow processes Maximum chlorine content of rosin flux mass Peak temperature package surface temperature Time at temperature of 200 or higher Preheating time at 120 to 150 Maximum number of reflow processes Maximum chlorine content of rosin flux mass Peak temperature molten solder temperature Time at peak temperature Preheating temperature package surface temperature Maximum number of reflow processes Maximum chlorine content of rosin flux mass Peak temperature pin temperature Soldering time per side of device Maximum chlorine content of rosin flux : 260 or below : 10 seconds or less : 60 seconds or less : 120 30 seconds : 3 times : 0.2 Wt. or below : 215 or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2 Wt. or below : 260 or below : 10 seconds or less : 120 or below : 1 time : 0.2 Wt. or below : 350 or below : 3 seconds or less : 0.2 Wt. or below Condition Symbol IR260
VPS
VP215
Wave soldering
WS260
Partial Heating
HS350
mass
Caution Do not use different soldering methods together
except for partial heating .
Preliminary Product Information
7
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPG2158T5K

	To Download UPG2158T5K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .